Prices checked on 25 September 2026 from stock on homeluxkenya.com. They change with the shilling and with shipments, so treat them as the going rate rather than a quote. Every product linked below shows the live price.
A sufuria in Kenya costs anywhere from about KSh 1,500 for a small cast iron plate to KSh 25,000 for a full tri-ply stainless steel set, and most of what people ask us about sits between KSh 6,000 and KSh 20,000 for a set of six to ten pieces. The spread is not random. It comes down to four things: the metal, whether it is a single pot or a set, the number of pieces (lids count), and the brand. This guide lays out what each type costs right now so you can decide what a fair price looks like before you buy anywhere.
Sufuria prices in Kenya at a glance
| Type | Single pot or pan | Set (6 to 15 pieces) |
|---|---|---|
| Aluminium non-stick | KSh 3,000 | KSh 7,500 to 22,500 |
| Granite coated | KSh 2,400 to 2,700 | KSh 15,500 to 24,000 |
| Ceramic coated | from KSh 3,000 | KSh 14,000 to 22,500 |
| Stainless steel (single layer) | KSh 3,000 to 4,000 | KSh 6,000 to 15,000 |
| Tri-ply stainless steel | KSh 3,500 to 7,500 | KSh 11,000 to 25,500 |
| Cast iron | KSh 1,500 to 7,000 | KSh 7,000 to 25,000 |
A set is almost always cheaper per pot than buying the pieces one at a time, but only if you will use most of the pieces. Read on for what sits inside each range.
What a set costs by number of pieces
Piece counts include lids, so a "10 piece set" is usually five pots with five lids, and a "15 piece set" often adds spoons or a frying pan. Compare the number of pots, not the headline number.
- 3 piece sets: KSh 6,000 to 7,000. This is the entry point for enamel cast iron, for example the 3 piece enamel cast iron set at KSh 6,999.
- 6 piece sets: KSh 6,000 to 11,500. Three pots with lids. Stainless steel starts at KSh 6,000 with the Royal Louis 6 piece, non-stick at KSh 7,500 with the Royal Louis mirror polish set, and tri-ply at KSh 11,000 with the Uakeen 6 piece tri-ply.
- 7 to 9 piece sets: KSh 9,999 to 19,999. Enamel cast iron sits at KSh 9,999 for the 7 piece enamel set, granite sets at KSh 15,999 to 19,999, and the Uakeen 9 piece tri-ply with a wok at KSh 18,499.
- 10 to 12 piece sets: KSh 9,799 to 25,000. This is the busiest bracket. Aluminium non-stick from KSh 9,799 (Edenberg 10 piece), stainless steel around KSh 12,500 (Edenberg 12 piece), tri-ply from KSh 19,999 (Uakeen 10 piece) to KSh 24,999 for the Uakeen VK58.
- 13 to 15 piece sets: KSh 17,500 to 22,000. Usually a 10 or 12 piece set plus a frying pan and spoons, for example the Edenberg 15 piece non-stick at KSh 17,500 or the UccLife 15 piece tri-ply at KSh 22,000.
Aluminium non-stick sufurias: KSh 3,000 to 22,500
The most common cookware in Kenyan kitchens. Light, heats fast, and nothing sticks for the first year or two. The price gap between a KSh 7,500 set and a KSh 18,000 set is mostly the thickness of the aluminium (die-cast is heavier and lasts longer than pressed) and the coating layers. Cheap non-stick warps on a jiko and the coating peels; a die-cast set holds up.
- Uakeen 28cm non-stick frying pan, KSh 3,000. A single die-cast pan for chapati and eggs.
- Royal Louis 6 piece non-stick set, KSh 7,500. Three pots with lids, the cheapest full set in stock.
- Edenberg 12 piece non-stick set, KSh 16,999. Mid range, induction ready.
- Edenberg 23 piece kitchen master set, KSh 19,999. The biggest set we carry, for a large family.
Browse the full non-stick cookware collection.
Granite and ceramic coated sufurias: KSh 2,400 to 24,000
Granite and ceramic are both coatings on an aluminium body. Granite has a speckled stone look and is a little tougher against metal spoons; ceramic is smoother and marketed as PFOA free. Single granite saucepans start at KSh 2,400 (Baroly granite saucepan), 9 piece granite sets run KSh 15,999 to 19,999, and 13 to 15 piece sets KSh 19,500 to 24,000. Ceramic sets cost KSh 13,999 for the MGC Crocodile 9 piece up to KSh 22,500 for the Uakeen VK-27 11 piece, which is die-cast and induction ready.
See all granite pots and pans and ceramic cookware.
Stainless steel sufurias: KSh 3,000 to 15,000
Single layer stainless steel is the workhorse for githeri, ugali and boiling. It does not chip or peel and takes a scrubbing. The catch is heat: thin steel has hot spots, so food catches at the bottom unless the pot has a thick induction base. Prices for a 6 piece set start at KSh 6,000 (Royal Louis 6 piece), 12 piece sets from Edenberg sit at KSh 12,500 to 12,999, and the JIO 12 piece with kettle is KSh 11,999. Single stainless frying pans and woks run KSh 3,000 to 4,000.
Browse stainless steel cookware.
Tri-ply stainless steel sufurias: KSh 3,500 to 25,500
Tri-ply is three bonded layers, stainless steel outside and an aluminium core through the whole pot, not just a disc at the bottom. That is why it costs about double single layer steel: the sides heat as evenly as the base, nothing burns onto the corners, and it works on gas, electric and induction. If you want one set to last twenty years, this is the type.
- Vikas tri-ply saucepan, KSh 3,499 to 3,999. The cheapest way into tri-ply, one small pot.
- Ferronix tri-ply frying pan 22 to 28cm, KSh 3,050 to 3,699. Uncoated, so no coating to wear out.
- Uakeen 6 piece tri-ply set, KSh 11,000. Three pots with lids.
- Uakeen 10 piece tri-ply set, KSh 19,999. Our best selling tri-ply set.
- Uakeen VK58 10 piece tri-ply set, KSh 24,999. Heavier gauge, mirror polish.
- Uakeen tri-ply kitchen set, KSh 25,499. 10 piece set, 28cm pan and 19 silicone utensils in one box.
See every tri-ply cookware set or the wider tri-ply collection including single pans and woks.
Cast iron sufurias: KSh 1,500 to 25,000
Cast iron is the heaviest and the slowest to heat, but once hot it stays hot, which is why it wins for nyama choma, slow stews and baking. Enamel coated cast iron (the colourful Dutch oven look) needs no seasoning and does not rust; raw cast iron is cheaper per kilo but needs oiling. Prices: sizzling plates from KSh 1,500, a cast iron frying pan at KSh 6,999, the 3 piece enamel set at KSh 6,999, the 7 piece enamel set from KSh 9,999, larger enamel sets at KSh 19,999 to 21,999, and the 11 piece raw cast iron set at KSh 24,999.
Browse cast iron cookware, Dutch ovens and casseroles and cast iron pans and sizzling plates.
What pushes a sufuria price up
Weight. Pick up two 24cm pots. The heavier one has thicker metal and will cost more, but it will not warp on a high flame and heats more evenly. This is the single best test in a shop.
Induction base. A magnetic steel disc or a full magnetic outer layer adds a few hundred shillings per pot. Worth it if you are moving to an induction cooker or might in the next few years.
Lids. Glass lids with steam vents cost more than pressed steel lids. They also count as pieces, which is how a 5 pot set becomes a "10 piece set".
Brand and origin. Uakeen, Edenberg and UccLife sets carry a premium over unbranded imports, and in our experience the difference shows after a year of daily use rather than on day one.
Where you buy. The same set is often KSh 2,000 to 4,000 more in a mall than online or in the CBD. Compare the model number, not the picture.
Which sufuria set should you buy?
If you are setting up a first kitchen on a budget, a 6 piece stainless steel or non-stick set at KSh 6,000 to 7,500 covers ugali, rice, stew and eggs. Add a single frying pan later.
If you cook for a family every day and want to buy once, a 10 piece tri-ply set at KSh 19,999 to 24,999 is the set we recommend most. It works on every cooker and there is no coating to replace.
If you love slow cooking and choma, one enamel cast iron Dutch oven or the 7 piece enamel set at KSh 9,999 alongside your existing pots does more than a whole second set.
If you are buying a gift, the Uakeen tri-ply kitchen set at KSh 25,499 or the kitchen bundles arrive as one complete box.
Frequently asked questions
How much is a sufuria in Kenya?
As of September 2026, a single sufuria or pan costs KSh 2,400 to 7,500 depending on material and size, and a set of six to twelve pieces costs KSh 6,000 to 25,000. Cast iron sizzling plates start at KSh 1,500.
Which sufuria is best for a gas cooker?
All of them work on gas. Tri-ply and die-cast aluminium spread the flame's heat most evenly, so food is less likely to catch in the middle.
Which sufuria works on an induction cooker?
Stainless steel with a magnetic base, tri-ply and cast iron all work. Plain aluminium does not unless the listing says "induction base". Check with a fridge magnet: if it sticks to the bottom, it will work.
Is a non-stick set worth it?
For eggs, pancakes and fish, yes. For boiling and heavy stews, stainless steel or tri-ply lasts far longer. Many homes run one non-stick pan and steel pots for everything else.
Do you deliver sufuria sets outside Nairobi?
Yes. We deliver countrywide, and you can pay on delivery within Nairobi. Call or WhatsApp 0723 784 736 / 0722 784 666 to confirm stock, or visit the showroom at Hazina Trade Centre, Mezzanine 2, Monrovia Street, Nairobi CBD.
Start with the full cookware collection, or jump straight to saucepans if you only need one pot.